GN Solids Control has been working on manufacturing various mud treating and recycling systems for many years. As a leading separation equipment provider, GN Solids Control is especially good at providing customized mud systems. Several days before, GN Solids Control has finished the manufacturing of one dewatering system for hydro wastes.
As we all know, GN Solids Control manufacture the following equipment, like shale shaker, desander, desilter, mud cleaner and centrifuge etc. By using different treating equipment, GN Solids Control is able to provide the most cost-effective solution for our customer.
This USA customer will use GN Dewatering System to treat those wastes collected from different work sites, which are usually transported by hydro-vac truck. Most of the wastes contain high percentage of solids, while part of them contains some water. In order to separate out those liquid inside and have dry solids, GN shakers and centrifuges will be used. By using GN Dewatering System, this USA customer will be able to recycle those solids (most of them are sands) and manufacture construction materials for sell. And the water can be reused to wash those construction stones in their worksite.
GN Dewatering System mainly includes the following equipment:
1. GN Feeding Hopper
When hydro-vac tanks arrived, wastes will be dumped into a large feeding hopper. Large solids or wood cuttings etc are all separated out.
2. GN Coarse Shaker
GN coarse shaker has several large panels which are fixed with opening mesh screens made of polyurethane. As the first phase treating equipment, GN coarse shaker plays a vital important role.
3. GN Finer Shaker
After treated by GN coarse shaker, a submersible pump will be used to transfer the slurry to GN Finer Shaker. Here it’s also fixed with opening mesh polyurethane screens.
4. GN Desilter
By using several 4 inch cyclones, GN desilter will remove all the solids large than 25 microns.
5. GN Centrifuge
Before this USA customer was using one pressing machine, as it can not be used continuously and also take too much room, they final choose to use GN centrifuge.
6. GN Flocculent System
In order to remove those finer solids or particles, GN Solids Control also provides one flocculent system. It can be used to mixing those slurry when feeding into decanter centrifuge.