Products & Solution
No need go to various sources, customers could find all the solids control equipment in GN Solids America. As all stages solids control equipment are integrated to function the drilling mud recycling processing, GN Solids America could provide the complete line equipment for solids control. While for single unit equipment, GN optimized design make it fit well with other brand equipment when working together in the complete mud system. Top quality with reasonable price, your ideal choice for Solids Control equipment.
Drilling Waste Management
In order to maximally recover the valuable drilling fluids and reduce the volume of waste discharge, the drilling contractors always adopt drilling waste management equipment to further treat the discharged waste cuttings. The main drilling waste management equipment involved is listing Vertical Cuttings Dryer, Hi G Dryer Shaker, Dewatering Centrifuges, Big Bowl Big Volume decanter centrifuge, Screw Conveyor, Screw Pump, Flocculation Device and some other equipment for final environmental friendly treatment.
GN Solids America could provide the main primary stage drilling waste management equipment like Vertical Cutting Dryer that is suitable for both OBM and SBM, and up to 8 high G-force dryer shakers with API Certificate. For different purpose, GN would offer the Decanter Centrifuge for drilling waste management and solids control.
GN Vertical Cuttings Dryer
- Tungsten carbide protection for scrapers
- Integrated gearbox unit for easy maintenance
- Individual oil lubrication system
- Main motor and oil pump motor interlocked to avoid prior starting oil pump
The GN Vertical Cutting Dryer uses centrifugal force to dry drilled solids in oil or synthetic base fluids. The drilling cuttings is fed to the cuttings dryer from flow line shaker through screw conveyor. Then a stainless steel screen bowl traps “wet” solids and accelerates them up to 890RPM with G force up to 420. Liquid or the filtrate is forced through the screen bowl openings, while “dry” solids are extracted by the angled scrapers attached to the cone, which rotate slightly slower than the bowl. Tungsten carbide protects the scrapers from abrasive and ensures long operational life. This aids in maintaining a constant gap between the scroll and screen bowl, which is crucial for Vertical Cutting Dryer proper operation. GN Vertical cuttings dryer has been done strict balance testing for all major rotary components to minimize vibration & noisy. Complete integrated gearbox unit make it performance stable and easy for maintenance. The Cuttings Dryer is an ideal product for oil based drilling waste management.
GN Vertical Cuttings Dryer fixed with individual oil lubrication system with automatic alarm for pressure limit. The procedure to run the equipment is firstly start the main motor and then oil pump motor. To avoid prior start the oil pump motor, it is designed interlocked for main motor and oil pump motor each other.
GN Decanter Centrifuge for Drilling Waste Management
GN high speed decanter centrifuge could be applied in dewatering unit for separating fine solids which can meet clients’ request for drilling waste management. The centrifuge can also be used to polish the drilling fluids recovered from the Vertical Cutting Dryer and send it back to active mud tanks.
For more information on decanter centrifuge for different purpose, please check: GN Decanter Centrifuge
GN HI-G Dryer for Drilling Waste Management
The GN Hi-G Dryer Shaker is with long shaker deck big capacity which is used for waste management to treat the drilling cuttings from the primary solids control equipments like shale shaker, desander & desitler that installed in the solids control mud tank to dry the solids for transportation, and make the fluids easier for further treatment. The function of the HI-G Dryer is similar as Vertical Cutting Dryer. Especially the Hi G dryer shaker has a good performance for WBM cuttings.
Drilling Waste Management Processing Flow Line
The waste cuttings discharged from the primary shale shaker and mud cleaner is delivered to the cuttings dryer or Hi G dryer shaker through screw conveyor or Vacuum pump. The filtrate and solid would be separated in the cuttings dryer and dryer shaker. The drier solids out from this 2 device would be environmental friendly to discharge directly or transported off-site for further treatment. The liquid is transferred by screw pump to the high speed centrifuge to remove the much fine solids. There may need flocculation process to let the extreme fine solid gather together for easy separation in decanter centrifuge.
Shale Shaker Screen is one type important wear parts in the drilling mud system. As a professional supplier for solids control equipment, GN Solids America also commits to provide shale shaker screen as per API standard for various brands shale shaker and mud cleaner. GN shale shaker screen factory keeps developing the world’s most advanced technology for making the shale shaker screens.
What Brand of Shale Shaker Screen GN offer?
- Derrick FLC2000 (48-30) Series Shaker
- FLC 500 (including 503,513,504,514 model) flow line cleaner
- MI-Swaco Mongoose PT Shakers (Composite Material Screen)
- ALS shale shaker
- BEM 600/650 Shakers
- Nov Brandt King Cobra
GN Solids America could also provide screen for GN own shale shaker and some other screen customized so long as tell us the dimension and structure type.
How to Order Shaker Screen from GN Solids America?
Factor 1:What Screen Dimension?
Specify Shaker Manufacturer & Model?(Well-Known Shaker)
Specify Shaker Screen Dimension & Picture?(Not Known Shaker)
Factor 2:What Screen Type?
PWP for “Hook Strip Flat Screen”
Or PMD for “Hook Strip Pyramid Screen”
Or PTC for “Steel Frame Screen”
Factor 3:What Screen Mesh/API No./Cut Point?
Give us inquired Screen Mesh?
Or Screen API No.?”
Or Screen D100 Cut Point?
Factor 4:What Qty for each item?
Factor 5:Purchase Schedule & Shipment Option?