• Twitter
  • Facebook
  • Google+
  • LinkedIn
  • YouTube


Contact Us

GN Solids America LLC

Tel:+1 (713) 320-3868

Email: This email address is being protected from spambots. You need JavaScript enabled to view it.

Add:6710 Windfern Road, Houston, TX 77040,USA


Drill Cuttings Solidification Equipment

GN Solidification are mainly used to treat drill waste that discharged from GN Cuttings Dryer and Decanter Centrifuge or Hi-G Shaker
  • Description

    GN Solids Control Co., Ltd has been upgrading solids control and drilling waste management systems since the establishment. Many types of cutting-edge equipment to treat drilling cuttings are provided to drill company in over 60 countries.

    GN Solidification or GN Stabilization equipments are mainly used to treat drill cuttings or drill waste that discharged from GN Cuttings Dryer and GN Decanter Centrifuge or GN Hi-G Shaker.

    GN Solidification Unit:

    • The cost of treating OBM or WBM is relatively low. No further chemical waste generated in the solidification process.
    • GN Solidification Unit is pretty convenient to operate and maintenance. Treating capacity can be adjusted easily by using variable speed screw conveyor.
    • After solidified the OBM or WBM is changed into solid, which can be reused for approved farming. 
    • These solidified waste can be transported conveniently without any spill or leak.

    The main component of GN Solidification Unit:

    1. Drill Cuttings Collection Hopper

    Drill cuttings are sent to the collection hopper by a screw conveyor, which collect all the cuttings from centrifuge, cuttings dryer and drying shaker. One 10HP screw conveyor is fixed under the hopper to transfer these cuttings to High-shear mixer.

    2. Storage Box

    There are two storage boxes: one is to storage absorber, the other is storage cements. Each storage box has one underneath screw conveyor; these two conveyors feed these materials into the high shear mixer.

    3. High-Shear Mixer

    The high-shear mixer has a large force to mix all the OBM, WBM or SBM together with absorber and cements. After mixing thoroughly, it discharges the waste in solid. A catching tank can be used to storage and transport them to other places.

    GN solidification units are largely used in drill cuttings management. The treating process is continually in worksite. By using different chemicals or absorbers, GN solidification unit can treat different OBM, WBM or SBM.

    Solidification Unit Parameter

    Model GNGH-15C
    Treating capacity ≤15 m3/h
    High-shear mixer power 45KW
    Drilling waste storage volume 5m3
    Drilling waste screw conveyor power 7.5KW
    Lime conveyor power 3KW
    Absorber conveyor power 3KW
    E.X. Standard ExdIIBt4
    Transportation Dimension 11524x2200x2528mm
    Weight 11.2 ton

Contact Us

Fields marked with ( * ) are required.


Contact us

By submitting this form, you accept our privacy policy.


  or   Create an account

Forgot your password? |  Forgot your username?


WS Register

  or   Login

Subscribe to Our Newsletter