GN Solids Control is a turnkey solids and liquid separation separation provider. Every year, GN Solids Control designed and manufactured hundreds sets of solids control and drilling waste management systems. Several weeks ago, GN Solids Control finished manufacturing of another set Oil Sludge Treating System.
GN Oil Sludge Treating System is mainly used to treat oil sludge from oil tank bottom, refinery plant and drilling rid site. Until now, GN Solids Control has provided whole oil sludge treating systems in USA, Finland, UAE, Russia, Kuwait and China etc. This set oil sludge treating system mainly is composed by the following GN treating modules:
1.GN Vacuum Pump
GN Vacuum Pump is a suction and transfer pump, heavy density and large viscosity drilling mud can be transferred. It is mainly used to suck the slurry and feed into the pre-mixing and heating tank.
2.GN Pre-mixing and Heating Module
GN pre-mixing and heating tank is fixed with mud agitators and hot water pipes, oil sludge is diluted in this module.
3.GN Shaker Treating Unit
GN shaker treating unit helps to remove those large particles, solids larger than 100 microns can be separate out. Different sizes screens can be chose when receive different oil sludge. A washing system is fixed inside the shaker to flush the screen after use a while to avoid block.
4.GN Decanter Centrifuge Unit
Here is a 2 phase decanter centrifuge, it separate out solids larger than 2~5 microns and recover clean fluid mixed with oil and water.
5.GN Inclined Plate Clarifier
Due the 3 phase disc-centrifuge has a higher working demand, solids less than 3~5% can be feed into it, we add one IPC unit to remove solids before feeding into disc-centrifuge.
6.GN Disc-Centrifuge Unit
After treated by GN disc-centrifuge, BS&W in the recovered oil is less than 3%, oil in the recovered water is 500-1000ppm.
7.GN Oil/Water Surge Tank
GN Solids Control provides a oil surge tank and water surge tank, customer just need to provide 2 large storage tank to connect with these surge tanks.